What is the primary maintenance of injection mold？

The primary maintenance of injection mold refers to the daily maintenance of injection mold by operators in production. The main contents are cleaning, lubrication and inspection.



The following is a detailed explanation about the primary maintenance of injection mold:
1.Maintenance during moulding
The upper and lower surfaces of the injection mould should be cleaned before the injection mould is installed to ensure that the installation surface of the injection mould and the working table surface of the press yizekv18 are not crushed and the parallelism of the upper and lower installation surfaces of the injection mould in production is ensured.

2.Maintenance of injection mold in production
The corresponding parts of the injection mould, such as guide pillars, are regularly oiled in production.



3.Post-production Maintenance
After the end of production, the injection mould should be inspected comprehensively. The injection moulds should be cleaned completely to ensure the cleanliness of the injection moulds. Clean up the waste in the injection mould to ensure that there is no waste in the waste box.



The primary maintenance of injection mold is conducive to the production of high-quality injection mold parts, which should be widely promoted.

yizekv19

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_859.html, reproduced please specify.