Main working process of CNC system

As we all know, CNC processing technology has been widely used in the mould processing industry. Today we will discuss the main working process of CNC system.



Generally speaking, the main working processes of CNC system are as follows:
1.Preparations for normal work
After switching on the power supply, the CNC device will check and diagnose the working status of each component of the CNC system and the CNC machine tool, and set the initial state.

2. Input of part processing control information

Main working process of CNC system



3. Decoding and Preprocessing of NC Processing Program

4. Interpolation calculation

After processing control information of a program segment is preprocessed, interpolation is performed. Interpolation means densification of data points on a curve with known starting and ending points.



5. Position control

The interpolation results are taken as the command values of the position regulators of the coordinate axes in the servo systems of the yizekv18 coordinate axes, and the displacements measured by the position detection elements on the machine tools are taken as the actual position values.



As a quality CNC Processing manufacturer, YIZE MOULD has introduced the above main working process of the CNC system for you. If you want to know more, you can contact us at any time!

yizekv19
The above article from YIZE official website (http://www.yizemould.com/)
The original address:http://www.yizemould.com/news/55.html, reproduced please specify.