What are the principles of CNC machining?

      The plan of machining process is aimed at the whole process, and can not be judged by the nature of a process and the processing of a surface. Now I will explain methods of process division and principles of CNC machining.
1.Methods of process division
Usually the division procedure in accordance with the principles of process concentration for these parts machined on numerical control machine,and the methods of division are as follows:
(1)Divide by the tools used
(2)Divided by the times of parts installed
(3)Divided by coarse and finish machining

2.Principles of CNC machining
(1)The principle of crude first and refined behind
(2)The principle of machining the base level first
(3)The principle of first face and rear hole
(4)The principle of reducing the number of tool changing
      After reading the above content, if you have any questions, you can consult YIZE.As a leader of mold components industry,Yi Ze is willing to dispel doubts for you!

lhguobg0616

The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_590.html, reproduced please specify.

Introduction of precision tungsten parts processing production

      How much do you know about the precision tungsten parts processing production?Let's have a look!
      Precision tungsten parts is mainly made of tungsten steel, and it is the steel containing tungsten steel, such as high-speed steel and some hot work die steel.There has a strict requirement on the hardness and heat resistance of steel for Steel containing tungsten , the hardness can reach HRB89 to 95, but its toughness will be a sharp decline.It commonly used in lathe tools, impact drill bit, glass knife head, tile cutter above, hard not afraid of fire, but crisp, rare metals.

      The above is the introduction of precision tungsten parts processing production.With the development of tungsten forming technology, more and more mold designers began to design the mold to favor materials as manufacturing precision tungsten steel, tungsten steel mold parts make people want to enter the 【precision mold parts】 industry. Manufacturing precision tungsten parts let YIZE strives for further improvement.


lhguobg0616

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_589.html, reproduced please specify.

How to maintain plastic mold properly

As everyone knows that there are many advantages in maintaining plastic mold well. How can we properly maintain plastic mold? Let's have a look!
Maintenance of plastic mold is mainly divided into three parts: maintenance of pre-production mold (cleaning up the gungo and rust on the mold surface), maintenance of the mold in production(checking the waterway regularly to see if it is smooth, and fastening all fastening screws）and maintenance of the mold after stopping（closing the cooling waterway first,and blowing the remaining water of the waterway in mold stop before stopping).

Use properly and maintain plastic mold can effectively prolong the service life of the precision plastic mould parts.After learning the proper maintenance of the plastic mold,to develop good habits before and after the start of the machine will make mold not easy to be damaged,and more effective to extend the service life.

lhguobg0616

The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_588.html, reproduced please specify.

Talk about the process of precision mold components

A set of molds is made up of many parts, some of which are process parts, and the other is structural parts.The process parts impact on the product quality directly, and its final quality is accomplished with precision machining method in the current mold processing enterprises.How to complete the process of precision mold components is related to the mold life and the delivery of the molding products.

Process control of mold finishing
According to the appearance of the mold parts, the parts can be divided into four main categories: shaft, disc, plate and forming heterogeneous parts. The process of these four kinds of parts is generally: rough finish - semi finishing - (quenching and tempering) - precision grinding - electrical processing - fitter finishing - assembly processing.

Practice has proved that the mold enterprise pays attention to the process of precision mold components is a long-term and effective way to survive and develop for the mold enterprise and its precision mold components.


lhguobg0616

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_587.html,reproduced please specify.

Exposing the development of automatic machine

     Since China joined WTO,the exchanges between China and other countries in the fields of economy,trade,culture,production and technology have been becoming more and more close,and the development of automatic machine has become increasingly prominent,here is the related information.
      Since 80s,due to the promotion of CNC machine,the western industrial obtain revolutionary advances in equipment level,processing range,processing quality and production efficiency,which has improved the level of industry,and has played a key role,therefore,it has greatly widened the gap between developed and developing countries.In our country, the overall benefit level of machinery industry has declined continuously for many years,and this gap is especially obvious.

      At present,the development of Chinese numerical control technology and equipment should mainly proceed with the following aspects:
1.High speed and high efficiency
2.High precision
3.High reliability
4.Compound
5.Multiaxial
6.intelligentize
      According to the development of automatic machine,China should actively encourage the popularization and research of the numerical control machine,as well as the automatic machine sales,so that Chinese CNC technology can not only catch up with the world level,but also catch up with it.

lhguobg0616

The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_586.html,reproduced please specify.

What Is The Standard Specification of Tungsten Carbide Mold Parts

    A lot of mold parts processing factory understands the standard specification of tungsten carbide mold parts, today let me analyse the standard specification of tungsten carbide mold parts.
   The process of tungsten carbide mold parts, after strict selection, selection of mixed fully, guarantee the tungsten carbide mold parts alloy without any impurities, other manufacturea will not reach the precision of it. And we also use hot isostatic pressing furnace (Sinter-HIP) high temperature isostatic pressing sintering and sintered (HIP), completely eliminate the perforations in the alloy, ensure that the alloy with high strength and high impact. The following is that the standard specification of tungsten carbide mold parts.
    The standard specification of tungsten carbide mold parts is Tmm*105x105, Tmm*100*100,...... And so, with can call the staff ha. Or customer specified size place an order, welcome customers to plan custom-made, tungsten steel parts processing.
A bar specifications phi 1~ Phi 200mm, length L1~L350...... Place an order, or size specified by the client.
B preformed blank to map processing products, drawings are customers, rough machining accuracy of 0~0.2mm.
C plate, bar material specifications of domestic have sufficient inventory......
If you don't know the standard specification of tungsten carbide mold parts,you can go to have a look. Yize mold is professional tungsten carbide mold parts wholesale manufacturers, are independent R & D tungsten carbide mold parts processing.Yize mould has a good knowledge of tungsten carbide mold parts.

lhguobg0616

The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_244.html, reproduced please specify.

About the definition of stamping mold parts

Precision stamping mold parts industry occupies an important position in a variety of related industries.Then what is the definition of stamping mold parts?

The so-called stamping mold parts is the accessories of a special process equipment that processes metal or non-metallic materials with moulds and press presses in industrial production to get the workpiece we need,which is the definition of stamping mold parts.
Precision stamping mold is an important index to promote Chinese GDP.Now the mold parts enterprises is developing continuously,meanwhile,the mold production technology and production experience have been improved,therefore,we should strive for continuous development so that occupy a higher position in the world mold industry.

lhguobg0616

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_585.html, reproduced please specify.

Analysis of Mold Components Processing In China

   Analysis of the mold components processing in the CNC machine tool.
   Analysis of the mold components processing, to consider the blank

material and type,mold components size, dimensional accuracy and surface

roughness, parts of complicated shapes, the number of parts, heat treatment,

machining parts for analysis, complete the part is machined material and the

shape of the blank, the tool to set scheme. Most of the connector mold parts

processing factory of up to consider fully from 3 aspects:
  Step1, Technical requirements to ensure parts; to improve productivity is

advantageous economy is cost-effective.
  Step2, mold components processing analysis for relationship from the

machine and the mold components production batch. Generally when the mold

components not too complex, batch and hinge hours, should adopt the general

machine tool; when the production batch is great to use special machine; in

many varieties, small batch production situation, when the parts are complex

when using CNC machine tool can obtain higher economic benefits.
  Step3, precision connector mold parts some of mold design, mold

accessories customized or connector, use ordinary machine may be difficult

to machining, the so-called process of structural difference. But the data

processing machine, can be an easy job to achieve. So in the process of CNC

technology analysis parts, need to rigorously evaluate the structure

process. In order to give full play to the advantages of CNC machining, the

parts must be considered when designing and CNC process design of contact,

surface modeling, thin wall light, complicated in structure.


lhguobg0616

The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_263.html,

reproduced please specify.