To celebrate the new year and look forward to the future

New beginning, new hope, a new day, a new sun,we will usher in a new year---2018, and start our new pursuits, sow new dreams, open up a new page, and write a new brilliance.At the beginning of the new year, we want to send you our best wishes: Happy New Year's Day!

happy New Year's Day

Nearing the end of 2017,we sincerely thank all our customers for their support and tolerance over the past year,at the same time,we should also thank the lovely staff of YIZE MOULD as we are qwyize06 a team with loving, without the joint efforts of all, there is no YIZE today,let us make persistent efforts continuously in 2018 and climb the peak bravely!

Where there is sunshine, there is my silent blessing.When the moonlight spilt to the earth, there is my silent prayer.When the meteor crossed,I made a wish:wish you peace and health,happy New Year's Day!

qwyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_650.html, reproduced please specify.

About the professional tungsten carbide mold parts factory

     Dongguan YIZE MOULD Co.,LTD is a professional tungsten carbide mold parts factory,and we have over 10 years' experience in tungsten carbide mold parts machining,next let me give you a detailed introduction about us.

     The main component of hard alloy of tungsten carbide and cobalt, which accounted for 99% of all components, 1% for other metals, so also known as tungsten steel, tungsten carbide is inside one, with high hardness, wears resistance, strength, heat resistance, corrosion resistance and a series of excellent properties, is widely used in the industry.

professional tungsten carbide mold parts factory

     As a professional tungsten carbide mold parts factory,our high quality tungsten carbide mold parts have been praised by the qwyize06 new and old customers all the time.Because this material---tungsten steel has better performance than other materials,tungsten carbide mold parts are becoming more and more widely used.

     Meanwhile,we have identified the trend of development,after years of development,we already have a large number of experienced technicians who are able to meet the needs of new and old customers.

qwyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_649.html,reproduced please specify.

How to properly maintain plastic mold parts

    Many friends in mold industry must understand that proper maintenance of plastic mold parts has many benefits. However, a lot of friends just don't know how to properly maintain plastic mold parts. Today, I will share some tips of correct maintenance of plastic mold parts.

    Blow is the methods to properly maintain plastic mold parts:
    First, the maintenance of plastic mold parts before production
A.The oil and rust on the surface of the mould should be cleaned up,and check if there is a foreign object in the casting mould cooling passages, and if the waterways is blocked.

B.Need to check whether the circular arc in mold gate sets has damage, whether  there are any remaining foreign body, whether there are abnormal moving parts, and whether the action is smooth.

    Second, the maintenance of plastic mold parts in production
A. Check all oriented guide pillar of mold everyday. And check whether the guide bush has damage.

B. Regularly check whether the waterway of mould is clear, and fasten all the fastening screw.

    Third, the maintenance of plastic mold parts after production

    Before stop, the cooling water must be closed first. qwyize06 Blow off the residual water on the mould waterway. Check if there is residual glue on the surface of the mold. Evenly spray the rust inhibitor after clean up the foreign object.

    The above methods to properly maintain plastic mold parts are all indispensable. Proper use and maintenance of plastic mold parts can effectively prolong the service life.

qwyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_389.html,reproduced please specify.

China Precision Mold Parts Manufacturer

     As we all know, the precision means that everything is required exactly.That is to say, the mold size,the mold sides,the mold material  must achieve the tolerance as the requirements of the clients.

   With the economic development, more and more people do mold business. If you want to stand by around the mould field, you should be look for profition above others. So out company take this chance to make precision mold parts.
The precision mold parts we made can achieve the tolerance between +/-0.001 mm in FG, +/-0.002mm in EDM. That is less company can achieve.

 
    Precision mold parts is mainly used in computer field, auto parts,  medicial field, agricultural and so on.The products are sold qwyize06 to European, America,Asia,south Africa even all over the world.Although Precision mold parts is requried exactly , Yize have a large number of experienced engineers. Please be confident in our product quality.

qwyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_173.html, reproduced please specify.

Merry Christmas

Today is once again an annual Christmas,first of all,YIZE want to send our sincere wishes to our western customers and send our best wishes to our domestic customers.

However,how much do you know about Christmas?At first,it was traditionally celebrated on December 25 by most Western Christian churches.Although dating to probably as early as a.d.200,the feast of Christmas did not become widespread until the Middle Ages.The Christmas festival qwyize06 falls on New Year's Eve, the beginning of the year, so Westerners attach great importance to this festival, a feast as much as China spring festival!

The way countries celebrate Christmas is a little different, but the most important thing to talk about is that the idea of eating apples at Christmas is only in China. Apple is a symbol of peace in China, so it has gradually become a "Chinese characteristic".YIZE MOULD is a Chinese core pins&sleeves manufacturer, and we hope all of you will have a wonderful Christmas!

qwyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_648.html,reproduced please specify.

The professional precision mold parts manufacturer---YIZE MOULD

      As a professional precision mold parts manufacturer,in any case,it is impossible to avoid the precision machining of the mold,but what is the precision mold parts processing?

      Precision mold parts processing refers to the processing of forming and blanking tools, and it is very accurate to do the job well, because it is precise, besides, it also includes cutting die and die cutting mold.Because we have to work very well and accurately in the precision mold parts processing,so as to form precision mold parts processing.

      YIZE MOULD is a professional precision mold parts manufacturer,we are the best in terms of price, precision and delivery,which qwyize06 is sure to reach all of your requirements,and we can also provide you the private custom precision mold parts processing,we can sure the high quality of our products!In addition,our precision mold parts would be exported,how can the export be carried if the quality is not passed,isn't it?

      Due to rapid development of Chinese economy,a lot of precision mold parts processing manufacturers have also developed,maybe it's difficult for you about how to choose an excellent precision mold parts manufacturer,you can understand us---YIZE first,I believe our products and services will make you satisfied so that you can cooperate with us trustingly!

qwyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_647.html,reproduced please specify.

Precision mold components or not is one of the best

Precision mold components or not is one of the best work.Precision mold components or not is the best work.Materials, precision mold parts before routine check.
Before operation, precision mold parts, check whether need maintenance, precision mold components, if they can earn.
Precision mold components, whether it is right, check, whether foreign body tilt, ever.
To avoid the new administrative act, should not lead to qwyize06 unfair in the form of damage, so run preparation must be done well.
Stamping waste must clean up completely, splashing waste residue and damage.
In addition, the die life shortening is the biggest reason, negligence, error.Now that ensures that the operation process, according to the stamping of manual operation.
If, in guaranteeing precision mold parts, instant, the best working condition.

qwyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_391.html,reproduced please specify.

Analysis of Tungsten Carbide Mold Parts Composite Processing

For the tungsten carbide mold parts composite processing, I believes that many friends who are in mold parts industry want to know. But not everyone grasp it completely. Today, I will analyze the tungsten carbide mold parts composite processing for you. Let everybody can understand it well.

For refined tungsten carbide mold parts processing center, it has the function of the vertical and horizontal processing tungsten steel plastic mold center. After a clamping, workpiece can accomplish all sides and the top surface processing except in accordance with the surface. It is also known as the five surface tungsten carbide mold parts processing center.

There are two forms of common five surface machining center. One is the principal axis can realize the transformation of stand and lie. Another is the spindle not change direction, tungsten steel tensile qwyize06 mold workbench with the workpiece rotate 90°for five surface of tungsten steel mold processing.
Five surface machining center have some disadvantages, such as the complexity of  structure, covers an big area, and high cost. Therefore, we should be very careful to do the tungsten carbide mold parts composite processing.

If you need tungsten steel parts processing, please contact Yize Mould, which is a professional tungsten arbide mold parts manufacturing and processing factory.

qwyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_377.html,reproduced please specify.

China Best Plastic Mold Components manufacturers--Yize

    If you want to choose the best quality plastic mold components manufacturers in China , it most depends on the Yize  mould. Yize mould is  one of the most high quality plastic mold parts manufacturers in China. Why will I be so sure? Please be allowed me to   introduce as below.

   Dongguan Yize mould co., LTD. is specialized in the production of plastic mold components, connector mold parts, round pieces,tungsten carbide mold parts manufacturers, factory with advanced imported machines, has a number of imported Sodick EDM, wire cutting EDM, grinding machine, etc., making  the precision of plastic mould components of FG: + / - 0.001 MM, EDM: + / - 0.002 MM, it is difficult for others to achieve , so it qwyize06 should be Yize is one of the most high quality plastic mold components manufacturers in China.

  Yize  mould is according to strict nine processes to produce  production, build perfect quality plastic mould components, relying on advanced technology, be doubled mould service life.Yize mould with a good team with 15 -year experience in mold components manufacturing, can absolutely meet the needs of the international market, fast delivery, humanized details focus on measures such as to make the best quality of China  precision plastic mould components manufacture.

   The plastic mould components in the mold parts production can occupy the important position on the market, its products are mainly exported to Europe and the United States, southeast Asia, Japan and other regions, and  get more praisefrom the customer.

qwyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_186.html,reproduced please specify.

The compatriots of YIZE make progress together and scale new height

As a part of Yi Ze, I feel very lucky because we have a good team and a perfect system.In order to enable us to achieve the unity of goods, behavior and even thought, the boss mobilized all the staff to attend the meeting.

At the meeting,with the help of Kazuo's success formula "Success = way of thinking × enthusiasm × ability" ,Mr.Wang gave us an analysis of how to achieve great success,and he also summed up 2017 and looked forward to 2018 and 2019.He said:"In 2017, we were still in the state of finding ways and laying the foundation,after a good foundation,2018 is a crucial year,and we must accomplish something so that by 2019 we will get a great success!"

As a quality connector mold parts manufacturer,we have four important points to be caught:delivery, quality, service and innovation, I believe we will rise abruptly based on its accumulated atrength after doing a good job in these four points!

qwyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_646.html,reproduced please specify.

Analysis of the service life of mold parts

    In the age of increasingly fierce competition in the market, the upgrading of products is faster and faster. The old products is eliminated quickly, and the new products constantly replace them, which highlight that production cycle of precision mold parts should be shorten as much as possible. The old way of mold production and processing are rapidly replaced by modern high efficiency production method to meet the requirement of short cycle of mold.

    However, mold part accessories need a lot of procedures when they are produced, which do not quickly change following the development of the era. A lot of friends also paid close attention to the service life of mold parts. The manufacturing process of mold is Complex, and the cycle of production is long. The material is also very expensive.qwyize06 Therefore, hardware mold accessories require to be durable once manufactured successfully. The technological equipment of mold parts is very expensive. At present, mold manufacturing expense accounts for about 10%-30% of the cost of products. The length level of the service life of mold parts will directly affect the cost of the product. Hence, In the case of mass production, it is more strict.

?  Dongguan Yize Mould manufacturer did the analysis for the service life of mold parts. We strive for a long life of the mold parts and producing efficient mold parts. We put forward higher requirements of reasonable selection for mold. The material of mold not only requires high strength, but also requires high hardness and wear resistance. At the same time, We also put forward more strict requirements of the corresponding thermal processing and heat treatment process, which stimulate the constantly emerging of new material of mold.

?  Yize Mould provide precision mold parts processing for you to make high quality and long life of mold parts accessories. And we can also custom-made all kinds of non-standard products or process all kinds of standard or non-standard carbide mold parts products according to the design drawing that customers provide .

qwyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_305.html,reproduced please specify.

About the structure of precision plastic mold parts

      The structure of precision plastic mold parts has various shapes and sizes,and next let me analyze the structure of precision plastic mold parts for you.

      First, it is necessary to analyze the surface composition of the part, because the surface shape is the basic factor of selecting the machining method. The precision plastic mold parts are made up of some basic surfaces and special surfaces. Secondly, the surface size has an important influence on the process. As an example, the hole and the small hole, the deep hole and the shallow hole have different characteristics in the process.

      Therefore, when analyzing the structure of precision plastic mold parts, we should not only pay attention to the characteristics of each part of the precision plastic mould parts, but also pay attention qwyize06 to the different combinations of these surfaces.It is these different combinations that form the structural features of the parts.The precision plastic mold parts with different structures are often different in the process.

qwyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_645.html,reproduced please specify.

Discussing the development of CNC machine

As we all know, CNC machine tool is suitable for processing various parts, high-precision optical components, auto parts, and electronic parts and so on, and processing materials include copper, aluminum, various kinds of stainless steel, plastic and rubber. Today we are going to explore the development of CNC machine.

From a macro perspective, the development of CNC machine can be divided into five stages: high speed cutting, high precision control, high flexibility, resource networking and system intelligence.

From the microcosmic point of view, we can analyze it from the following aspects:
1.High speed cutting can be achieved through high speed operation, fast interpolation calculation, ultra-high speed communication and high-speed spindle.
2.High spindle speed can reduce the cutting force, and is qwyize06 conducive to the deep parts of the machine vibration, infectious greatly reduce heat, cutting speed, thermal deformation is reduced, so the machining precision and surface quality can be improved significantly.

3.The CNC system in twenty-first Century will be a highly intelligent system. It can realize self-adaptation, self-diagnosis and self-adjustment in local or global process, intelligent programming, intelligent monitoring, and expert system can reduce operator's requirements.

Above, we discussed the development of CNC machine tool from two angles of macro and micro. Besides, if you want to know compensation method for CNC machining, you can continue to focus on the dynamic of YIZE.

Dongguan Yize Mould Co.,Ltd. is a professional company in CNC machining from China.Yize was founded by Sam Wang in 2006,located in Dongguan City,China. Serving many mold companies at home and abroad,known for good quality, competitive price,reliabilty and on time delivery.Our dedicated and experience staffs are ready to serve you.Contact us today!

qwyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_644.html,reproduced please specify.

The Development of Precision Plastic Mold Components Industry

    If  there is something wrong with precision plastic mold components industry production problems, it can not be ignored.we precision plastic mold components  industry manufacturing industry to the national interests, not because of personal interests,engage in unfair means of competition. Our country is vast in territory. A great difference between the conditions of regional economic development, the mold industry is also very obvious area, the situation of our country closely related with.Talk to the precision  plastic mold components industry development.

    At present, the Yangtze River Delta, the Pearl River Delta region has become the fast development of our country area, in recent years, the Yangtze River Delta economic zone has becomethe fastest-growing region for foreign investment, in this situation, Jiangsu inprecision plastic mold industry also has a huge advantage, this advantage will be to expand the radiation hinterland, maintain and improve the the advantage position.The other domestic hardware industry base, first of all to see is that lack of knowledge, competition could be developed. In the Guangdong side, moldproduction are not good, especially in Dongguan and Changan, although Changan is known as the "mold town", but still have a lot to do with the continuous efforts,Guangdong local needs and industry development together, other market is no exception, this is the need of developing socialist market economy.

    Every year our country has $about 10000000000 of hardware products areexported, but really can get profit is not worth mentioning, this is our precision plastic mold industry market producers pay more attention to the precision plastic mold components  industry problem. At present, the wealth of experience accumulated precision plastic mold components  industry in our country has not reached a certain level, so far, bigger and stronger precision plastic mold components industry or for a very long time, this is inevitable. In the internationalization process of production, we should  meet the challenge,to set up their own platform at the same time, better integration of resources, weshould Ze first step beyond the domestic manufacturers, the second step to catch up with Europe and the United states. With the world leading level on an equal footing, we really realize yize mold the dream of power.

qwyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_194.html,reproduced please specify.

Analysis of connector mold parts maintenance skills

   Regularly check connector mold parts can prolong the service life of

connector mold parts ,analysis of connector mold parts maintenance 

skills,regular maintenance role for the die life up. Each injection molding

position required annual repair procedure, depending on the different

connector mold parts cycle. Here are some connector mold parts maintenance

skill, can let the user to ensure the effective operation of each connector 

mold parts hot runner, heater, guide column and connector mold parts, to

prevent accidental circumstances.

  Check whether the air vent warning rust or moist phenomenon. If you found

arusty or humid phenomenon in the vicinity of hot runner exhaust hole, that

meansthe internal condensation, or pipe might rupture. Wet phenomenon will

lead toshort-circuit heater fatal. If the machine is not all year-round

operation, need to be in the evening or weekend shut down, then the

condensation probability will be increased.

   Remember to remind the operator not to heat the tip clean out at the

gate. If the operator happened to see a small piece of stainless steel mold

nozzle,connector mold parts maintenance skills,there may be a bit nozzle

assembly. Clean out of this seemingly hinder things often destroy the hot

tip. So as not to damage the hot nozzle, please confirm before taking

action, the hot runner system of nozzle type, and to ensure that all

operators will be trained with regularity, to identify your contact with

different types of nozzle.

qwyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_293.html,reproduced please specify.

Analysis of EDM Technology

EDM technology is a new process using electric energy and heat energy, commonly known as discharge machining.

The difference between EDM technology and general machining in the EDM tool and the workpiece does not contact, but by the tool and the workpiece continuously produced by pulsed discharge, partial discharge, using the instantaneous high metal removal step by step down, in the discharge process of a visible spark, it is called edm.

The necessary conditions for EDM technology are:
1.Pulse power must be used
2.The tool electrode and the workpiece must be kept a certain gap between the machined surfaces
3.Discharge must be carried out in a liquid medium with certain insulation properties.

If you want to know more about EDM technology like what are the principles of EDM machining,please pay attention to the dynamics of YIZE MOULD.We will show you the information you want to know at the first time.

qwyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_643.html,reproduced please specify.

Talking about high precision stamping mold parts

The processing of high precision stamping mold parts has been developing vigorously in various fields of national economy.Today,I will introduce the high precision stamping mold parts of YIZE MOULD for you.

YIZE MOULD is mainly engaged in the processing of high precision stamping mold parts and other mold parts processing,then,what are the advantages of YIZE?
1.16 steps of strict process in the elaborate production to make perfect quality of mould components.
2.Armed up with advanced equipment from Japan and an excellent production team.
3.Depending on advanced technology, mould lifespan can be multiplied.
4.Personal attention to details
5.Rapid delivery

The precision stamping mold processing provides the superior condition and the development road for the high precision stamping mold parts processing of YIZE.YIZE was founded by Sam Wang in 2006,located in Dongguan qyyize06City,China.Serving many mold companies at home and abroad,known for good quality,competitive price,reliabilty and on time delivery.Our dedicated and experience staffs are ready to serve you.We look forward to your inquiry and cooperation!

qwyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_642.html,reproduced please specify.

Plastic mold parts products

    Mainly consists of a concave die composite substrate, plastic mold parts products and plastic mold components.

    Plastic mold parts products with variable cavity, die with variable core composed of punch combinations of substrates, punch assembly, punch combination pallets, cavity truncated components and side cutting composite plate. Coordinated variation of convex die, the concave die and the auxiliary molding system. Series of plastic mold parts can be processed in different shapes, different sizes.

   In order to improve the performance of plastic mold parts products, and adding various auxiliary in polymer materials, such as fillers, plasticizers, stabilizers, lubricants, colorant, can become the good performance of plastic mold parts.

   First, the synthetic resin is the main components of plastic, plastic in the content in general 40% ~ 100%. Due to the content, and properties of the resin is often decided by the plastic properties, so people often plastic resin as a synonym.

   Second, the packing also called filler, it can increase plastic strength and heat resistance, and reduce the cost of. For example, phenolic resin after adding wood powder can greatly reduce the cost, make bakelite became one of the most cheap plastic, but also can significantly improve the mechanical strength. For example, phenolic resin after adding wood powder can qyyize06 greatly reduce the cost, make bakelite became one of the most cheap plastic, but also can significantly improve the mechanical strength. Packing can be divided into organic and inorganic filler packing two categories, the former such as wood powder, rags, paper and all kinds of textile fibers, the latter such as glass fiber, diatomite, asbestos, such as carbon black.

   Third,plasticizer can increase the plastic plasticity and flexibility, reduce the brittleness, easy processing molding plastic. Plasticizer is generally can with resin miscibility, non-toxic, odorless, high boiling point of organic compounds on the optical, thermal stability, the most commonly used is the adjacent benzene two formic acid esters.

qwyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_266.html,reproduced please specify.

Introduction of plastic mold components

    In recent years, with the rapid development of plastic industry,the  application range of the plastic products is growing, such as household appliances, instrumentation, construction equipment, the automotive industry, daily hardware, and many other fields. The proportion of plastic products is rapidly increasing. A reasonable design of plastic mold parts often can replace more traditional metal pieces.

    General categories: mold components can be divided into plastic mold components and non-plastic mold components. Non-plastic mold components include die casting mold parts, forging die parts, punching die parts and so on.

    Basic knowledge of the plastic mold components and technology  application:
It is a modular plastic mold used for molding, extrusion, injection,blow molding and low foaming molding. It mainly includes the variable cavity die and flexible core punch. The former is made of die composite substrate, die components and combination of concave die card board. The latter is made of punch combination substrate, punch components, punch card board, cavity truncation components and side cut composite slab.

    A variety of tools and products used in our daily life and production have close relationship with the mold, such as embryo head screws, buttons and all kinds of household appliances shell.

    Dongguan Yize Mould Co.,Ltd is a manufacturer specializing in the precision plastic mold components processing. Yize has years of experience in plastic mold components and precision mold parts manufacturing. Our advanced technology and high quality service have obtain good evaluation of customers at home and abroad. Welcome to contact us!

qwyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_329.html,reproduced please specify.

Four key points for the maintenance of the injection molding machine

In order to make the machine creates value with the highest efficiency,and works in the best condition,you should pay attention to the daily inspection and maintenance of the injection molding machine,so that you can prevent or reduce the mechanical parts and hydraulic device with high performance failure,improve the accuracy of products, reduce wear and prolong life.

The content of the maintenance of the injection molding machine can include the following four parts:qyyize06
1.Safety agencies,such as whether the adjustment of the safety bumper is reasonable and reliable.
2.Mechanical adjustment,such as the drive of each machine, electric, oil road, etc., the bolts of each part is locked tightly.

3.Electrical computer,such as whether electrical insurance is properly matched.
4.Hydraulic Circuit,such as pressure and flow test of hydraulic system.

The maintenance of the injection molding machine is aimed at keeping the equipment in the best state of performance,ensuring the smooth injection mold processing,prolonging the service life of the machine,and reducing the cost of maintenance,I hope you can attach importance to it.

qwyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_641.html,reproduced please specify.

The influencing factors of mold components surface polishing

In the mold components processing industry, surface polishing should be known by a lot friends. Today follow us to look, what are the influencing factors of mold components surface polishing? What are the most prominent aspects?

1.the surface condition of workpiece.
In the process of machining, surface of materials will be damaged by heat, internal stress, or other factors. Improper cutting parameters will affect the polishing effect. The surface after EDM  is much more difficult to grind than the surface after machining and heat treatment. So, before the end of EDM, it should adopt the electrospark fine trimming . Otherwise, it will form the hardening thin layer on the surface.

If the criteria of electrospark fine trimming is selected improperly, the depth of the heat affected layers can up to 0.4 mm. The hardening thin layer is harder than the matrix hardness. It must be removed. So it's best to add the coarse grinding, which provide a good foundation for polishing process.

2.The quality of the steel
High quality steel products is the premise of good polishing quality. All kinds of inclusions and porosity in steel will affect the polishing effect. To achieve good polishing effect, the workpiece must indicate the polishing surface roughness at the beginning of the machining.

3.The technology for heating processing
If the heat treatment is improper, there will be differences on the steel surface hardness and property, which can cause difficulties for polishing.

4.The polishing technology
Because the polishing is mainly completed by manual work, people’s skills are still the main influencing factors of mold components surface polishing.
From the above can get to know, there are four factors influencing the mold components surface polishing. If you want to know more about mold parts polishing, you can come to our official website to find.

qyyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_327.html, reproduced please specify.

Development of Core Pins And Sleeves Technology

  Along with social progress, economic development, all walks of core pins and sleeves technology are developed,the core pins and sleeves  industry has developed, many core pins and sleeves industry for the mold demand also began to change, precision core pins and sleeves industry prospects of a broad, precision core pins and sleeves  market supply situation. However, the proportion of high school low-end mold industry  production in China is extremely uneven, which is not conducive to the development of mould technology, China mold industry, to speed up the adjustment of structure,the development of high-end market, synchronized with the international market.

   Compared to the previous, the technological level of China core pins and sleeves  technology has greatly improved, but the proportion of high school low-end domestic mold industry production is extremely unbalanced, which is not conducive to the development of China mold industry. Although in recent years, the structure and system of mould industry in our country has made a great change, mainly as follows: the high-grademold, large-scale, precision, complex, long life. But because of China middle and low mold demand is too large, while the high-end core pins and sleeves technology but self rate of less than 60%. It is not difficult to see, the unreasonable.

    In recent years, domestic core pins and sleeves technology  enterprises continuously improve mould technology andproducts, therefore, some core pins and sleeves technology begin to flow in the world, success among some high-end industry supply chain system, it is to replace some imported products, get rid of the dependence on the. But undeniable is, just a few among the international high-end market.

   According to the 12th Five Year Plan, China core pins and sleeves industry will focus on breaking large core pins and sleeves design,  automotive plastic mould, plastic mold parts and so on. Only by continuously follow up these new advanced technology,advanced products, not only for the times, this is also the reason why yize mould in core pins and sleeves technology has been popular, along with the pace of the times, and strive to do auto mold parts. Along with the technical level of China mold industry, improve product level gradually increased.

  China mold industry in the future will continue to increase production capacity.The product structure toward the development of high-end mold, to the import and export structure improvement.

qyyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_274.html,reproduced please specify.

What is the principle of profile grinding?

It is the most commonly used and most useful method that using profile grinding to finish punch, mold and cavity module and core in grinding mold manufacturing. So what is the principle of profile grinding?

The principle of profile grinding is as follows:
The mould forming parts such as the punch edge and the cavity of the pieces of many shapes, usually by mane brick with straight line or circular arc and arc dash alignment is decomposed into several linear and circular short dash line, and then segmented grinding, which are connected into a slick, grinding way light the whole and fit pattern.

This is a "green channel" of understanding profile grinding.In addition, the profile grinding is characterized by good quality, high accuracy and fast processing speed. The mold parts are usually shaped and machined after heat treatment, which reduces the influence of the deformation of the parts after heat treatment on the precision of the mold.

qyyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_640.html,reproduced please specify.

The design and technology of domestic precision connector mold parts

      Mold processing technology is an advanced manufacturing process, which has become an important development direction of the mold industry, today we will discuss the design and technology of domestic precision connector mold parts.

      Precision connector mold parts are used widely in aerospace, automobile, machinery and other industries,and advanced mold p rocessing technology can improve the overall efficiency and competitiveness of the entire manufacturing industry.However, there is still a long way to go for the the design and technology of domestic precision connector mold parts.

      We can set up the database of mold process and provide more data of processing method for manufacturing enterprise.The advantages and disadvantages of various processing methods are apprehended at a glance, which is of great significance to promote the of plastic mold parts processing technology,and the design and technology of domestic precision connector mold parts are also developing actively toward this direction.

qyyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_639.html,reproduced please specify.

How To Judge The Quality of Connector Mold Parts

   How to judge the quality of connector mold parts? Connector mold parts is the main products in Yize mould. So it is important for us to judge the quality of connector mold parts.
  The important parts of connector mold parts is the surface quality.The surfaceis rough, the actual contact area is small, convex peak pressure per unit area increases, more easily surface wear. Even in a lubricating oil conditions, also because of the critical value of contact pressure over the oil film tension,destruction of the oil film forming, by increasing the wear surface layer.

   The hardening layer on the surface of the surface layer hardness of connector mold parts to improve, so that the surface of the elastic and plastic deformation is reduced,reducing the wear, to improve the wear resistance of connector mold parts.
  If the surface of connector mold parts quality is good,we will judge the quality of connector mold parts is good. Please be confident in our quality of connector mold parts.

qyyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_301.html,reproduced please specify.

What the precision plastic mold components suppliers pay attention to？

  With the continuous development of precision plastic mold components, precision plastic mold components suppliers pay more and more attention to the quality of precision plastic mold and institutional diversity, so as to understand the processing characteristics of precision plastic mold components, also is the emphasis on processing technology of plastic mold parts, so that better processing quality,and various precision plastic mold components in order to meet the needs of customers, more and more requirements.

   Precision plastic mold components of the structure with a variety of shapes and sizes, this is the precision plastic mold components suppliers should know. The following is the author of yize molds for you to analyze the structure of the specific parts of the processing characteristics, the first choice to analyze the parts which are composed of the surface, because the surface is the basic shape of the processing method of the basic factors. Precision plastic mold components are composed of a number of basic surface and special surface. There are inner and outer cylindrical surface, conical surface and plane surface, and the surface of the special surface is mainly in the surface of the spiral surface, the involute and the other forming surface.

 For example, the outer surface of the cylindrical surface is generally made of turning and grinding, and the inner hole is obtained by the method of drilling, expanding, hinge, boring and grinding. Secondly, the surface size of the process also has an important influence, for example, large holes and small holes, deep holes and shallow holes in the process have different characteristics. Therefore, in the analysis of parts of the structure, not only should pay attention to the parts of the various components of the surface itself, but also pay attention to the different combinations of these surfaces. It is these different combinations that form the structural characteristics of the parts. For example, the inner and outer circle is the main surface, which can be composed of disk and ring parts, and can also form a sleeve type part. For the sleeve parts, but both sleeve is a thin-walled sleeve shape complex.

   These different structures of precision plastic mold parts in the process often have a greater difference. Precisely because of this difference makes precision mold components suppliers strive for excellence, the pursuit of more superior processing technology.

qyyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_518.html,reproduced please specify.

How to Choose the Precision Carbide Punches Processing Factory

It's really hard for buyers about choosing a absolutely good precision carbide punches processing factory,so here I will talking about the five standards of choosing precision carbide punches processing factory.

Choosing the Precision Carbide Punches Processing Factory 

1. Look at the R & D capability of carbide punches. By looking at the ability of a design engineer, it is possible to estimate the processing capacity of a plant.

2.Look at the processing precision of carbide punches. Selection of precision tungsten steel parts processing factory, regardless of brand, to the quality first, the best conditions to do the test.

3. Look at whether the factory has good credibility and integrity. "Good faith management" not only requires buyers, but also requires manufacturers to strictly abide by.

4. Understand the basic situation of the manufacturer, history, inspect the time of the establishment of the factory to verify the market competitiveness of the manufacturer. The company's various documents and profiles, the company's website, mature market programs, and so on, can become a way to understand the manufacturers.

5. To see whether there are high attainment salesmans in the factory. In addition to products, business personality charisma also directly affect buyers choose processing manufacturers.

Dongguan YIZE MOULD Co.,LTD is a precision carbide punches processing factory that has many years of experience in tungsten carbide mold parts processing. After years of hard work,YIZE has become a high-quality supplier,so choose YIZE is the choice of quality!

qyyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_638.html,reproduced please specify.

The Excellent Precision Pastic Mold Parts Processing Factory---YIZE MOULD

Dongguan YIZE MOULD Co.,LTD is a famous precision plastic mold parts processing factory in Changan town,and our precision plastic mold parts have always good reputation.As an excellent precision plastic mold parts processing factory,today YIZE will talk about the forging process of precision plastic mold parts.

Precision plastic mold parts free forging process can be divided into basic processes, auxiliary processes and finishing processes three categories.

Precision plastic mold parts processing basic process is to change the blank shape and size to obtain the required forgings of the process, such as upsetting, pulling, punching, bending, twisting, misalignment, etc.; auxiliary process is the basic process for easy operation preformed deformation process, such as pressure jaws, the edge of the slab, pressure shoulder, etc.;finishing process is used to trim the surface defects forgings, so that it meets the requirements of the pattern of the process, such as calibration, formation, spheronization and so on.

If you want to find an excellent precision plastic mold parts processing factory,you must not miss YIZE MOULD!Welcome to send drawings and offer,our professional production personnel and business personnel will serve you!

qyyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_637.html,reproduced please specify.

The knowledge that you need to know when ordering precision mold parts

    Nowadays, the market competition is intense. Whatever industry you do would have a lot of rivals. So does precision mold parts industry. A lot of friends know nothing at the time of ordering precision mold parts, so it is quite possible to buy something not suitable. Today we mainly talk about the knowledge that you need to know when ordering precision mold parts.

In fact, before ordering, you need to consider a lot of problems. For example, whether the product has a metric and imperial dimensions on a global scale. And, for a supplier, the standard thing may be not standard for another supplier. Therefore, when you purchase precision mold parts, you must communicate with the precision mold parts suppliers about the following questions: the global replaceability, the stability and traceability of product quality, the compatibility of mold parts, the range of products, the source of materials, the effectiveness of the non-standard accessories, product certification, mold parts maintenance skills, the product price (whether inclede the tax and shipping), and the interchangeability of parts. I will illustrate the following three points in detail.

    1.Simple installation and mold parts maintenance skills: Check whether attach the simple installation instructions. Packaging products should also be marked with some maintenance skills together, such as cleaning, lubricating, disassembling and replacing skills.

    2.the product price (whether inclede the tax and shipping): These mold parts should have the value-added space of market competitiveness, and their material must be genuine.

    3. the interchangeability of parts: After a period of time, you can replace the previous version in time when the supplier's component design has changed.

    For all the above factors, you should consider when ordering precision mold parts.

qyyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_312.html,reproduced please specify.

Why the Sales of Tungsten Carbide Mold Parts is not High?

Under the current advanced promotion technology, the sales of tungsten carbide mold parts is still not very good. It is because the present scale of production, manufacture level of domestic mold enterprise is inferior.

At present, a considerable part of domestic mold manufacturing enterprises are private enterprises or individuals. Limited by the capital, sites, technology, information communication and many other factors, quite a number of enterprises depend on traditional equipment and manual manufacturing to complete, that is difficult to have scale. They can only produce some medium and low-grade mold. It is difficult to introduce advanced die making technology and advanced equipment. So the sales of tungsten carbide mold parts is not high.

Dongguan Yize mold parts Mr.wang said, technical backwardness is often easy to see, but sometimes it is difficult to realize the backward management. Generally, the management of foreign advanced mold enterprise is according to production process. But some Chinese mold parts enterprises still continue to use that kind of a teacher with a few disciples, implements the labor contract system from the beginning to the end.

It can be seen from the above analysis, Backward mold manufacturing system is the reason why the sales of tungsten carbide mold parts is not high. So in this case, we should manage all aspects of production, improve the production system, and increase the innovation and development of tungsten carbide mold parts industry. Tungsten carbide mold parts is the basic process equipment of industrial production, known as the mother of industry.

qyyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_369.html,reproduced please specify.

About the definition of precision stamping spare parts

      Precision stamping spare parts occupy an important position in many related industries,so what is the definition of precision stamping spare parts?Let's have a look at it!

      The so-called precision stamping spare parts is to process the metallic or nonmetallic materials with mould and professional press machine in the industrial production,and so that get the shape we need.
      Mold is generally divided into plastic mold and non plastic mold,and non plastic mold includes casting mold, forging die, stamping die, die casting mold, etc..

      Precision stamping spare parts is an important index to promote China's GDP. Now private mold enterprises continue to develop,and the mold production technology,production experience have been improved,we need to develop continuously under the premise of understanding the definition of precision stamping spare parts so that strive to occupy a higher position in the world mold and die industry.

qyyizebg06

The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_636.html,reproduced please specify.

The discussion about principles of EDM machining

In the modern mold manufacturing industry, EDM machining has the same position as grinding machine, milling machine, lathe, wire cutting and so on, and it is an indispensable process.Today I'd like to introduce the principles of EDM machining.

1.Macro explanation
The principle of EDM machining is the process of converting electric energy into heat energy (instantaneous about 10000 degrees) by means of the positive and negative charged body (i.e. electrode and workpiece) which is close to but not touching, namely, the electrode and the workpiece, so as to achieve the purpose of forming the corrosion process.

2.Microscopic explanation
The principle of EDM machining is to produce a strong electric field when the negative electrode is infinitely close to the workpiece by mechanical control without touching the workpiece with positive charge. It produces electron flow, impacts the outer electrons of the insulating liquid particles, increases the number of electrons in the form of Pyramid, and then bombardment the atomic particles on the surface of the workpiece with extremely high acceleration and speed, so that it can fall off under the influence of the blasting force after the high temperature.

The principles of EDM machining are as shown above,in summary, the EDM machining is a kind of precision machining, as a technical personnel,we must know its principles so as to do a good job of EDM machining of mold parts.

qyyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_635.html,reproduced please specify.

Selection of Precision Mold Parts Products

   According to the precision mold parts material and precision mold parts products batch materials,to meet the precision mold parts products processing requirements, should have good precision mold parts processing properties, easy machining, good ability, heat treatment deformation.

  To meet precision mold parts requirements, in precision mold parts manufacturer, usually according to the similarity of precision mold parts products structure and process, can be roughly divided into various precision mold parts of the die working surface parts, sheet metal parts, shaft parts, sleeve parts etc.. The precision mold parts processing method mainly includes mechanical processing, special precision mold parts processing two categories, mechanical processing method mainly includes the cutting and processing all types of metal cutting machine tools, CNC cutting machine with normal and car, milling, planing, drilling, boring, grinding can be completed most of the precision mold parts products processing, adding to the precision mold parts products operation, can realize the whole precision mold parts products manufacturing. Mechanical precision mold parts processing method is the main method of precison mold parts,precision mold parts even by a special machining method, also need to be pre processed by mechanical processing method.

  With the requirements of the continuous improvement of quality, high strength, high hardness, high toughness and other special properties of die materials appear and complex surface, hole is constantly increasing, the traditional mechanical precision mold parts processing method has been difficult to meet the requirements of the mold processing. Therefore, the direct use of electricity, heat, light, chemical process, electric chemical, energy and other special processing have been developed very fast, special processing method at present by the electric processing has been widely used in modern precision mold parts manufacturing, it is an important supplement to the machining methods.

qyyizebg06

The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_297.html,reproduced please specify.

Precision mould parts machining center

  Dongguan City, the famous city China mould,it is the precision mould parts machining center too.Mould people embracing with innovation of science and technology, technical content of high-tech people more and more high, businesses began to dig into the precision mould parts,in order to make our science and technology innovation,they in the way of precision mould parts customer customization and polishing grinding.
  Precision mold parts customer customization of the processing factory is a way of management, mainly in order to facilitate the processing of precision mould parts of processing factory, Yi Ze precision mould parts machining center using this method to produce mould parts customization . A custom precision mould parts accuracy is: + 0.001mm dimensional tolerances and concentricity, roundness is less than 0.002 0.0015mm, surface roughness and straightness tolerances in 300mm Ra0.025 less than 0.002, and in accordance with the national standard GB, Japanese standard JIS, German standard DIN, American Standard AISI international industrial standard production.

Precision mould parts customer customization is customized according to the needs of customers, the customers to sample, to map the client made more prominent, customer oriented, customer supreme principle, Yi Ze mold lets the customer processing of mould parts more satisfaction and confidence.
  In addition, Yi Ze play precision mould parts machining center by the method of precision mould parts polishing and grinding, polishing and grinding  precision mould parts can improve the surface quality of round parts, meet the requirements of surface quality of parts and precision, and can prevent rust, more importantly, polishing can increase the life circle.
  Precision machining center for precision mould parts customer customization and polishing grinding is the mold industry's technological innovation and business innovation. To promote the rapid development of precision mold parts.

qyyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_516.html,reproduced please specify.

The Meeting of Sharing Experiences Has Been Held in YIZE MOULDS Last Night

In the era of continuous progress,if an enterprise does not progress in thought and technology,it will eventually be eliminated by the times.As an excellent precision connector mold parts manufacturer,YIZE is also pays attention to the development of the times so that keep up with the pace of the times.

In order to strengthen the cohesion of enterprises,improve production technology,and ensure that the delivery time is punctual,there was a meeting of sharing experiences that was held by Mr.Wang of YIZE MOULD last night.

During the meeting,Mr.Wang shared his life experience and summed up his experience at first:
1.Labor can make life rich,make people respected,create personality,set an example,make the family happy,and make people harvest happiness.
2.We must change,be strong,and overcome our weaknesses.
3.Even if there are shortcuts, we will stick to our principles.
4.In the face of difficulties and setbacks,either burned to ashes, or Nirvana rebirth.

Secondly, the current situation of production of Yi Ze, the biggest enemy of the delivery stage of our point of view, and encourage Duoyi colleagues to work together to overcome the difficulties, improve production technology, delivery guarantee, guarantee the mould parts, parts quality, do a professional precision connector mold parts manufacturer.

1.Everyone tries to carry out perfectionism
2.Making every effort to do every step
3.Keeping a high degree of alertness, even with minor errors, can lead to serious consequences
4.All actions listen to command

Finally, Mr.Wang shared his own views on the future development of the connector:the absolute competitiveness of the future, high price is not a problem, the popularization of automation will become a new trend.
1.Degree of automation
2.The stability of talents
3.Clear goals
4.A high degree of unity
5.Taking the initiative to take responsibility
6.Guarantee of delivery date

Perseverance is the way to success,as an excellent precision connector mold parts manufacturer,YIZE has developed in Dongguan mold industry for more than ten years,we believe that YIZE will get better and better!

qyyizebg06

The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_634.html,reproduced please specify.