Precision plastic mold parts plant management tea party

In order to better manage the company and promote the development and progress of the company, precision plastic mold parts plant Yize mould aunched an tea party for the company's management, so that everyone can learn and share in a relaxed and happy environment.

Precision plastic mold parts plant Yize this tea party activity is mainly around the theme of "wise life". We discussed the following issues and expressed our views.

1. The difference between teams and gangs
2. The difference between general and senior general
3. What role do leaders play?
4. Is it appropriate to criticize employees in person?
5. Is the person who has to tell the truth good or bad?
6. The importance of communication?
7. As a cadre, what is the most important?
8. What do we think of urgent delivery?
9. Cadres should take the lead in abiding by rules
10. To respect others is to respect yourself
11. Is it better for cadres to treat their subordinates with firmness or gentleness?
12. Taking the right path can bring our abilities into full play
13. What should we do to the employees who are difficult to manage?
14. What is the most important thing for a company?
15. Man has unlimited possibilities
16. There must be one out of three who can be your teacher.

One of the most important missions of precision plastic mold parts factory Yize is to pursue the happiness of both the material and spiritual aspects of all employees. Tea party is a better form of communication, so that everyone can express their opinions in a relaxed environment and put forward their own opinions on the management of the company. The company will also improve these opinions, so as to provide better service for customers.

yizali2iy

The above article from YIZE official website (http://www.yizemould.com/)

The original address:(http://www.yizemould.com/newsshow-48-122-1.html), reproduced please specify.

Several cleaning methods of precision machinery equipment components

Do you know how to clean precision machinery equipment components correctly? Construction machinery parts in the assembly process basically need to be cleaned, today, Yize mould share you a few cleaning methods of precision machinery equipment parts.

The purpose of cleaning parts is to remove casting sand, iron filings, rust, abrasive, oil, dust and other dirt on the surface. The cleanliness of parts after cleaning will directly affect the assembly quality and the service life of construction machinery, so the cleaning of parts is a very important link in the assembly of construction machinery. The cleaning agent and cleaning method should be selected correctly according to the material, structural characteristics, pollution and cleanliness requirements.

There are five cleaning methods for precision machinery equipment components:

(1) Scrub. Put the parts into the container containing diesel oil, kerosene or other cleaning liquid, and scrub them with cotton yarn or brush. This method is simple in operation and simple in equipment, but low in efficiency. It is suitable for single piece and small batch of small parts. Generally, gasoline should not be used because of its fat solubility, which will damage people's health and cause fire easily.
(2) Boil and wash. Put the prepared solution and the parts to be cleaned together into the cleaning pool with proper size welded by steel plate, and heat it to 80 ~ 90 with the stove under the pool, and then boil and wash it for 3 ~ 5 min.
(3) Spray wash. Spray the cleaning fluid with certain pressure and temperature to the surface of the parts to remove oil stains. This method has good cleaning effect and high production efficiency, but the equipment is complex, which is suitable for cleaning parts with less complex shape and serious oil dirt on the surface.
(4) Vibration cleaning. The parts to be cleaned are placed on the cleaning basket or cleaning rack of the vibration cleaning machine, and immersed in the cleaning fluid. The vibration generated by the cleaning machine simulates the manual rinsing action and the chemical action of the cleaning fluid to remove oil stains.
(5)Ultrasonic cleaning. The chemical action of the cleaning fluid and the ultrasonic vibration introduced into the cleaning fluid work together to remove oil stains.

The precision machinery equipment components manufacturer Yize mould reminds you: the cleaning method should be selected reasonably according to the causes and characteristics of oil stains, so as to ensure the normal use of parts, avoid corrosion or damage caused by cleaning, and prevent environmental pollution and subsequent contamination of parts.

With 14 years of professional knowledge and unique manufacturing range, Yize company is capable of the following production processes as turning, milling, grinding, EDM, WEDM, PG and designing&assembling sets of mechanical components and mould components according to customers’need.

yizali2iy

The above article from YIZE official website (http://www.yizemould.com/)

The original address:(http://www.yizemould.com/newsshow-49-121-1.html), reproduced please specify.

"Outdoor picnic" activity of precision machinery equipment parts factory

Last Sunday, Dongguan precision machinery equipment parts factory Yize mould organized all staff to carry out an "outdoor picnic" activity, to enjoy the natural beauty and gather team strength.

This picnic activity is carried out in the natural scenery with shade, reservoir and fruit trees. You can fish and pick longan. What is most worth mentioning is the cooking link of each group. We work together to cook delicious dishes. Let us feel the atmosphere of the scene together, and feel that we can smell the food through the screen~

The team building activity came to an end amidst laughter. Precision mold parts manufacturer Yize mould has always paid attention to the construction of corporate culture, advocates family culture, enriches employees' spare time, and allows employees to work and live easily and happily.

With 14 years of professional knowledge and unique manufacturing range, precision machinery equipment parts factory Yize company is capable of the following production processes as turning, milling, grinding, EDM, WEDM, PG and designing&assembling sets of mechanical components and mould components according to customers’need.

yizali2iy

The above article from YIZE official website (http://www.yizemould.com/)

The original address:(http://www.yizemould.com/newsshow-48-120-1.html), reproduced please specify.

Small batch precision mechanical parts processing choose Yize mould

Many inquiry customers said that small quantities of precision mechanical parts processing manufacturers are too difficult to find! Why? Although there are many precision mechanical parts manufacturers in Guangdong, it is not easy to find the right one. Large scale manufacturers have a lot of equipment, but they are not willing to make a small number of them. Small scale manufacturers are willing to accept small batch orders, but the accuracy is difficult to guarantee. Therefore, we recommend Yize mold, a precision machinery equipment parts manufacturer that can manufacture large quantities of precision mechanical parts as well as small quantities.

Yize mould can customize samples for new projects just researched and developed. yizali2ii It has advanced processing equipment, experienced technicians, complete testing equipment, strict processing process and suitable selection for small batch precision mechanical parts processing.

With 14 years of professional knowledge and unique manufacturing range, Yize company is capable of the following production processes as turning,milling,grinding,EDM,WEDM,PG and designing&assembling sets of mechanical components and mould components according to customers’need.

Therefore, whether it is small batch, or large quantities of precision mechanical parts processing, Yize can provide you with satisfactory service. From the order, planning process, production, inspection, packaging, shipping, one-to-one follow-up service throughout the whole process, strictly keep customer information confidential. If you need to customize precision mechanical parts, choose Yize! Free quotation for you!

yizali2iy

The above article from YIZE official website (http://www.yizemould.com/)

The original address:(http://www.yizemould.com/newsshow-49-119-1.html), reproduced please specify.

Wish Yize members happy birthday!

In addition to holding some group building activities on a regular basis, Yize mould also holds a birthday party every month for the Yize members whose birthday is that month, so that everyone feels warm after busy work. Here, we wish the Yize members happy birthday!

We arranged many links for the party, including performances, games, eating cakes, making a wish, etc. Celebrating the birthday of employees is also an important part of our corporate culture. yizali2ii It is to strengthen the communication between the company and employees, gradually improve the company's welfare system for employees, so that employees have a deeper sense of belonging to the enterprise.

Let's grow up together and create a better tomorrow for Yize. We welcome like-minded friends to join us!

yizali2iy

The above article from YIZE official website (http://www.yizemould.com/)

The original address:(http://www.yizemould.com/newsshow-48-118-1.html), reproduced please specify.

Xiamen Industrial Exposition 2020

From July 11 to 12, 2020, Xiamen Industrial Exposition and the 24th cross strait machinery and electronic commodity fair were held in Xiamen Convention and Exhibition Center, which built a professional platform for the exhibition of cross-strait intelligent manufacturing products and solutions, interpretation of industry development trend, experience and technology exchange and sharing, and industrial docking cooperation, which injected strong impetus into the development of cross-strait manufacturing industry and the revitalization of market confidence.

Dongguan Yize mold, as a precision machinery equipment parts customized factory, naturally will not miss this industry event. The company's marketing department manager and promotion department manager visited the exhibition together.yizali2ii The exhibition scale of this Expo is 60000 square meters, attracting more than 600 mechanical and electrical enterprises from both sides of the Taiwan Strait. About 23175 professional merchants attended the fair. 54 guests shared their opinions on various forum activities Our two managers have benefited a lot.

In order to provide customers with satisfactory products, we should first understand our customers' needs and the development status of the industry. This exhibition is undoubtedly a good opportunity for us to learn more knowledge and information about the machinery industry. In the future, we will keep pace with the pace of the times and provide better service for customers.

With 14 years of professional knowledge and unique manufacturing range, Yize company is capable of the following production processes as turning,milling,grinding,EDM,WEDM,PG and designing&assembling sets of mechanical components and mould components according to customers’need.

yizali2iy

The above article from YIZE official website (http://www.yizemould.com/)

The original address:(http://www.yizemould.com/newsshow-49-117-1.html), reproduced please specify.

Material requirements of precision machinery parts processing

Recently, we have received a lot of inquiries from customers. Some of them have asked us what kind of materials are better for processing. In fact, precision machinery parts processing has certain requirements for materials.

First of all, the materials of precision machinery parts processing are divided into two categories: metal materials and non-metallic materials. For metal materials, the hardness of stainless steel is the largest, followed by cast iron, followed by copper, and finally aluminum. The processing of ceramics and plastics belongs to the processing of non-metallic materials.

Precision machinery equipment parts manufacturer must pay attention to the density of materials before processing. If the density is too high, the hardness is also very large. If the hardness exceeds the hardness of lathe tool, it will not be processed. It will not only damage the parts, but also cause danger, such as turning tool flying out to hurt people. So, what are the requirements of materials for precision machinery parts processing processing?

Let's focus on stainless steel materials：

Not all materials are suitable for processing. Materials that are too soft or too hard are either not necessary or cannot be processed. For some occasions, the higher the hardness of the material, the better. It is only limited to the hardness requirements of the machine parts. yizali2ii The processed materials cannot be too hard. If they are harder than the parts, they cannot be processed. Secondly, the material should be soft and hard, which should be at least one grade lower than the hardness of the machine parts. At the same time, it also depends on the function of the processed components, so as to reasonably select materials for the parts. For mechanical processing, the material material should be lower than the hardness of the cutter, so that it can be processed. Not all materials can be processed precisely. If the hardness of some materials is too large and exceeds the hardness of the machine parts, the machine parts may be broken. Therefore, these materials are not suitable for precision machining, unless they are parts made of special materials or laser cutting.

With 14 years of professional knowledge and unique manufacturing range, Yize company is capable of the following production processes as turning, milling, grinding, EDM, WEDM, PG and designing&assembling sets of mechanical components and mould components according to customers’need. If you need to process precision machinery parts, welcome to figure quotation, we will provide you with suitable processing scheme and suggestions.

yizali2iy

The above article from YIZE official website (http://www.yizemould.com/)

The original address:(http://www.yizemould.com/newsshow-49-116-1.html), reproduced please specify.

Surface treatment of high precision plastic mold parts

As we all know, the service life of high precision plastic mold parts is related to its material and precision. At the same time, some surface treatment technologies can also improve the surface performance of mold parts, so as to improve the service life of products. yizali2ii These surface properties mainly include: wear resistance, corrosion resistance, friction coefficient, etc. So, what are the surface treatment processes of high precision plastic mold parts?

The surface treatment technology of high precision plastic mold parts is a systematic engineering to change the surface morphology, chemical composition, microstructure and stress state of precision mold parts through surface coating, surface modification or composite treatment technology, so as to obtain the required surface properties. The methods of surface treatment can be divided into chemical method, physical method and mechanical method.

Nitriding, carburizing and hardening film deposition are the main applications in precision plastic mold parts supplier. Because nitriding technology can form a surface with excellent performance, and the nitriding process has a good coordination with the quenching process, at the same time, the nitriding temperature is low, there is no need for intense cooling after nitriding, and the deformation of precision mold parts is very small, so the nitriding technology is most widely used. Among them, CVD and PVD are more mature at present. In order to increase the bonding strength of the coated workpiece surface, a variety of enhanced CVD and PVD technologies have been developed. Yize produces and processes all kinds of precision tungsten steel round punches and punches. The outer diameter accuracy is within 0.002, and the inner hole is within 0.005. It can be polished and PVD coated.

In addition to the surface treatment of high precision plastic mold parts, Yize also provides a variety of precision mold parts anode, nitriding, TICN、TIN、DLC、CRALN、ALTIN surface treatment processing, turning, milling, plane, circular, grinding, spark discharge, wire cutting discharge, PG optics and other process procedures, and can design and assemble complete sets of mechanical components and mold components according to customer requirements.

The times have been progressing, Yize will also adhere to the times, to provide customers with satisfactory mold products.

yizali2iy

The above article from YIZE official website (http://www.yizemould.com/)

The original address:(http://www.yizemould.com/newsshow-49-115-1.html), reproduced please specify.

Dongguan WEDM processinig factory Yize mould and add a new Sodick machine!

In order to better meet the needs of customers, Dongguan WEDM processinig factory Yize mould and add a new Sodick machine-Sodick ALN400Qs WEDM machine.

Dongguan WEDM processinig factory Yize is a professional precision mold parts processing factory, providing domestic and foreign customers with precision plastic mold parts, precision metal stamping die components, non-standard round parts, tungsten carbide round parts, precision machinery equipment parts customized processing. In order to better provide service for our customers, this time we purchased a Sodick WEDM machine, with the processing accuracy of ± 0.002. Our existing WEDM equipment includes Sodick series: aq360, AQ550, aq325, aq4000ls, aln400qs; Seibu m50a, at the same time, we also provide precision EDM, grinding, CNC processing, PG processing and other mold parts processing services, which can meet your customized requirements.

Here is our new machine assembly scene:

Dongguan Yize mould Co., Ltd. adopts advanced Japanese production equipment and processing technology to produce high-quality products. yizali2ii The products are mainly sold to Germany, the United States, Japan, Italy, Singapore, Thailand, Malaysia and other countries and regions. We can make, process and inspect according to the world brand standard according to the requirements of customers. And according to the national standard GB, Japanese Standard JIS, German standard DIN, American Standard AISI and other international industry standards. Product accuracy: dimensional tolerance ± 0.001 mm, coaxiality within 0.002, true roundness 0.0015 mm, surface roughness Ra0.025, straightness 300 mm within 0.002.

If you are looking for a WEDM processinig factory or need to customize precision mold parts, please call us to customize, we will have professionals to serve you wholeheartedly!

yizali2iy

The above article from YIZE official website (http://www.yizemould.com/)

The original address:(http://www.yizemould.com/newsshow-48-114-1.html), reproduced please specify.

Problems in the precision metal stamping die components processing

Before placing an order, customers pay more attention to the delivery date. In order to ensure the delivery date and win the order, we must overcome the difficulties in processing. So, what problems are easy to appear in the precision metal stamping die components processing ? Let's learn about it together with Yize Mould.

First of all, there will be mold damage in the precision metal stamping die components processing. Mold damage refers to the mold cracking, fracture, expansion and so on. To deal with the mold damage problem, we must look for the reason from the mold design, manufacturing technology and mold use. For example, in the production process, there are foreign matters in the mold that are not treated, or the quenching temperature of the mold is too high, and some parts are installed incorrectly, which will cause the mold to be damaged in the stamping production process.

Secondly, the problem of clamping die will also appear in the precision metal stamping die components processing . This is because of the problems such as incorrect orientation and inclination of the mold, incorrect installation of the mold position, yizali2ii and poor accuracy of the press. At this time, it is necessary to stop production and find out the cause.

Therefore, in order to ensure the normal precision metal stamping die components process, we need to maintain the mold, timely repair, to prevent mold damage, when there are really irreparable problems, it can only be scrapped. Usually pay more attention to these problems can reduce the cost of mold production, improve production efficiency.

With 14 years of professional knowledge and unique manufacturing range, Yize company is capable of the following production processes as turning,milling,grinding,EDM,WEDM,PG and designing&assembling sets of mechanical components and mould components according to customers'need.

yizali2iy

The above article from YIZE official website (http://www.yizemould.com/)

The original address:(http://www.yizemould.com/newsshow-49-113-1.html), reproduced please specify.

Precision machinery equipment parts manufacturer Yize mould Japan Exhibition

 From June 19 to 22, 2019, the general manager of precision machinery equipment parts manufacturer Yize Mould, and members of the Japanese marketing department attended the International Nagoya Mould Exhibition.

International Mould Exhibition (intermold) is sponsored by Japan Die & Mould Industry Association, with strong support from Japanese Ministry of economy and industry, Ministry of foreign affairs, Nagoya Municipal government, Nagoya chamber of Commerce and industry, Japan Trade Promotion Association, etc. The exhibition is held annually in Nagoya and Tokyo.yizali2ii

Precision machinery equipment parts manufacturer Yize mold Japan exhibition aims to expand our international market. Before that, Yize Mold Exhibition Group also participated in the United States International Mold Exhibition, hoping to show the strength of Yize to the world and seek cooperation opportunities from the world.

Yize mould Japan Exhibition has both graphic and graphic introduction, physical display and audio-visual display. At the same time of the exhibition, the on-site operation performance is carried out to enable visitors to observe and exchange views on the spot.

Through the exhibition, Yize has a more intuitive understanding of the information technology and mold technology innovation in the mold industry, and exchanges with the international industry, absorbing the essence, so that we can go back to China to better upgrade and innovate our precision machinery equipment parts manufacturing technology. During the exhibition, the elite of the die and mould industry have been in an endless stream, and have also kindled the enthusiasm of our business colleagues. Actively introduce to them the advantages of the company and a series of plans to be launched, so as to truly serve the interests of customers.

With 14 years of professional knowledge and unique manufacturing range, Precision machinery equipment parts manufacturer Yize company is capable of the following production processes as turning,milling,grinding,EDM,WEDM,PG and designing&assembling sets of mechanical components and mould components according to customers'need.

yizali2iy

The above article from YIZE official website (http://www.yizemould.com/)

The original address:(http://www.yizemould.com/newsshow-50-112-1.html), reproduced please specify.

Yize mould new employee exchange meeting

Recently, precision mold parts manufacturer Yize mould held a new employee exchange meeting, organized by the human resources manager. The purpose of this activity is to let employees better understand the company's situation and corporate culture, and grow and develop together with employees. At the same time, we hope to listen to the views and suggestions of new employees on the company through this activity.

Before this activity, precision mold parts manufacturer Yize mould has arranged various training courses for new employees, including training in corporate culture and post functions. yizali2ii This time, we gather together to help new employees integrate into the company faster and better, and strengthen the communication with colleagues while strengthening their professional skills.

In just a few hours, the leaders of the company and the new employees promoted the heart to heart communication, and recorded the questions and suggestions put forward by everyone. For the problems raised on the spot, the personnel department could answer them face-to-face. If they could not reply and explain on the spot, they should make records and sort out the replies to the people asked. The reply time should not exceed three days, so as to sincerely help the employees solve the actual problems.

Dongguan Yize Mould Co., Ltd. is a professional non-standard round parts manufacturer, precision machinery equipment parts, tungsten carbide round parts, precision plastic mold parts, precision metal stamping die components, precision mold accessories processing and manufacturing enterprises. Customized precision mold parts, please call and write to consult ~

yizali2iy

The above article from YIZE official website (http://www.yizemould.com/)

The original address:(http://www.yizemould.com/newsshow-48-71-1.html), reproduced please specify.