2019 Yize mould fire drill

In order to do a good job in the fire control work of the park, ensure the safety of life and property of all personnel, implement the basic principle of "prevention first, combination of prevention and elimination" in the fire control work, and cope with sudden fire accidents, according to the requirements of the fire department, Yuexing fire control company held the 2019 fire drill training in the basketball court of the industrial park on September 6 at 2 p.m.yizali2ii

Fire drill is an activity to enhance people's awareness of safety and fire prevention, let everyone further understand and master the fire handling process, and improve the coordination and cooperation ability in the process of handling emergencies. Enhance the awareness of mutual rescue and self rescue of personnel in the fire.

Life first, prevention in advance, fire safety needs you and me to act together!

yizali2iy

The above article from YIZE official website (http://www.yizemould.com/)

The original address:(http://www.yizemould.com/newsshow-48-28-1.html), reproduced please specify.

Precautions for CNC precision machining of mechanical parts

The quality and precision of mechanical parts are our eternal pursuit. Today, Yize mold shares with you some precautions for CNC precision machining of mechanical parts, and works with you to learn and make progress together.

First of all, in the CNC precision machining, attention should be paid to the clamping method and the selection of clamps. In NC machining, the clamping method of the parts to be processed also needs to select the positioning benchmark and clamping scheme reasonably. When selecting the precise benchmark, the two principles of "unified benchmark" and "coincident benchmark" should be followed. In addition to these two principles, we should also consider:

a. Try to finish the machining of all surfaces in one-time positioning and clamping, so choose the positioning mode that is convenient for all surfaces to be machined.

b. When the workpiece is clamped at one time, all surfaces of the workpiece shall be processed.

c. When determining the position of the workpiece on the worktable, we should take into account the processing of each station, the influence of the length of the tool and the rigidity of the tool on the processing quality.

d. As far as possible, the fixture used in the control machining should be assembled by general components and adjustable to shorten the production preparation period.

Secondly, in CNC precision machining, pay attention to the arrangement of machining sequence. When arranging CNC machining sequence, the basic principles must be followed, including "face before hole", "rough before finish", etc. in addition to these basic principles, we should also follow the following principles:

a. According to the cutter centralized process processing, avoid the repeated use of the same cutter, reduce the number and time of tool change.
b. For the hole system with high requirement of coaxiality, the hole system at other coordinate positions shall be processed after the processing of the hole system is completed after one positioning, so as to eliminate the error caused by repeated positioning and improve the coaxiality of the hole system.
c. Select and determine the cutter point and tool change point, once determined, it is not suitable to replace.yizali2li

The quality of our products can only be guaranteed by controlling every detail of processing. Yize mold has been committed to improving the process of turning, milling, plane, circle, grinding, spark discharge, wire cutting discharge, PG optics, etc., and can design and assemble a complete set of mechanical components and mold components according to customer needs, and purchase precision mold parts. Please give Yize mold a Opportunity, we will serve you wholeheartedly.

yizali2ly

The above article from YIZE official website (https://www.yizemould.com/)

The original address:(http://www.yizemoulds.com/news_show_6_29_939.html), reproduced please specify.

Yize mould carries out outdoor mountaineering activities

In order to enrich the spare time life of the staff, to fully relax the staff after the tense work, to promote the exchange and communication between the staff, to enhance the cohesion, to strengthen the construction of corporate culture, to show the positive spirit of Yize staff, the company organized an outdoor mountaineering activity.

The destination of this mountaineering is Lianhua Mountain in Dongguan. This mountaineering activity is divided into groups. The three groups who are the first to reach the top of the mountain will get rich bonus. On the way to the mountain, we were full of spirit, chasing each other, helping each other and encouraging each other. Finally, we successfully reached the summit in the laughter.yizali2li

Here are our top three climbers:

First place: Surpassing team

Second place: struggling team  

Third place: rookie team

Through this mountaineering activity, the staff showed their strong will of not afraid of hardship, not afraid of fatigue and climbing the peak bravely. I hope that after that, we can devote ourselves to work and life with more enthusiasm and stronger physique.

yizali2ly

The above article from YIZE official website (https://www.yizemould.com/)

The original address:(http://www.yizemoulds.com/news_show_6_28_938.html), reproduced please specify.

Dongguan Yize mould precision machinery parts processing

With the continuous change of the times, people's requirements for quality are higher and higher. Now the workmanship of machinery is quite different from before, and more attention is paid to details. Dongguan Yize mould provides precision machinery parts processing, customized matching precision machinery parts for you.

Next, Yize mold will introduce the following materials for precision machinery spare parts:

1. Cast iron. Cast iron and steel are both FERROCARBON alloys. The main difference between them is the carbon content. Iron carbon alloy with carbon content less than 2% is called steel, and cast iron with carbon content more than 2%.

2. Steel. Compared with cast iron, steel has high strength, toughness and plasticity, and its mechanical and processing properties can be improved by heat treatment. The blank of steel parts can be obtained by forging, stamping, welding or casting, so it is widely used. According to application, steel can be divided into structural steel, tool steel and special steel.yizali2li

3.Copper alloy. Copper alloy can be divided into bronze and brass. Brass is an alloy of copper and zinc, and contains a small amount of manganese, aluminum, nickel, etc. it has good plasticity and fluidity, so it can be rolled and cast.

In addition to the above metal materials, there are rubber, plastic and other non-metallic materials.

Yize mould provides all kinds of precision machinery parts processing: shaft parts, plate parts, thread parts, gear parts and other precision mould parts customized processing.

yizali2ly

The above article from YIZE official website (https://www.yizemould.com/)

The original address:(http://www.yizemoulds.com/news_show_6_29_937.html), reproduced please specify.

Communication meeting for new employees of Yize mould

At the end of May, the communication meeting of new employees of Yize mould was held in the training room of the company, which was organized by the manager of human resources department. The purpose of this activity is to let new employees better understand the company's situation and corporate culture, and grow and develop together with employees.

The activity flow is as follows:
1. Participants introduce themselves to each other
2. Employees interact and ask questions, and speak freely around the following contents:
   2.1 suggestions for tutors' guidance;
   2.2 whether the work arrangement, work responsibilities, work process and relevant requirements are clear;
   2.3 whether it adapts to the working environment and corporate culture;
   2.4 suggestions on various group construction activities and welfare of the company;
   2.5 other reasonable demands and valuable suggestions. yizali2li

In just a few hours, leaders of the company and new employees promote heart to heart communication, record the questions and suggestions put forward by everyone one by one, answer the questions put forward on the spot by the personnel department in person, and make records for those who can't reply and explain on the spot, sort out and reply to the asked personnel. The reply time can't exceed three days, and sincerely help employees solve the actual problems. I hope you will not only strengthen your professional skills, but also attach importance to communication with colleagues in the future work. The new employees also expressed that they felt the encouragement and support from the company and would devote themselves to the future work with gratitude.

yizali2ly

The above article from YIZE official website (http://www.yizemould.com/)

The original address:(http://www.yizemoulds.com/news_show_6_28_936.html), reproduced please specify.