Analysis of connector mold parts maintenance skills

   Regularly check connector mold parts can prolong the service life of

connector mold parts ,analysis of connector mold parts maintenance 

skills,regular maintenance role for the die life up. Each injection molding

position required annual repair procedure, depending on the different

connector mold parts cycle. Here are some connector mold parts maintenance

skill, can let the user to ensure the effective operation of each connector 

mold parts hot runner, heater, guide column and connector mold parts, to

prevent accidental circumstances.

  Check whether the air vent warning rust or moist phenomenon. If you found

arusty or humid phenomenon in the vicinity of hot runner exhaust hole, that

meansthe internal condensation, or pipe might rupture. Wet phenomenon will

lead toshort-circuit heater fatal. If the machine is not all year-round

operation, need to be in the evening or weekend shut down, then the

condensation probability will be increased.

   Remember to remind the operator not to heat the tip clean out at the

gate. If the operator happened to see a small piece of stainless steel mold

nozzle,connector mold parts maintenance skills,there may be a bit nozzle

assembly. Clean out of this seemingly hinder things often destroy the hot

tip. So as not to damage the hot nozzle, please confirm before taking

action, the hot runner system of nozzle type, and to ensure that all

operators will be trained with regularity, to identify your contact with

different types of nozzle.

qwyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_293.html,reproduced please specify.