How to properly maintain plastic mold parts

    Many friends in mold industry must understand that proper maintenance of plastic mold parts has many benefits. However, a lot of friends just don't know how to properly maintain plastic mold parts. Today, I will share some tips of correct maintenance of plastic mold parts.

    Blow is the methods to properly maintain plastic mold parts:
    First, the maintenance of plastic mold parts before production
A.The oil and rust on the surface of the mould should be cleaned up,and check if there is a foreign object in the casting mould cooling passages, and if the waterways is blocked.

B.Need to check whether the circular arc in mold gate sets has damage, whether  there are any remaining foreign body, whether there are abnormal moving parts, and whether the action is smooth.

    Second, the maintenance of plastic mold parts in production
A. Check all oriented guide pillar of mold everyday. And check whether the guide bush has damage.

B. Regularly check whether the waterway of mould is clear, and fasten all the fastening screw.

    Third, the maintenance of plastic mold parts after production

    Before stop, the cooling water must be closed first. qwyize06 Blow off the residual water on the mould waterway. Check if there is residual glue on the surface of the mold. Evenly spray the rust inhibitor after clean up the foreign object.

    The above methods to properly maintain plastic mold parts are all indispensable. Proper use and maintenance of plastic mold parts can effectively prolong the service life.

qwyizebg06
The above article from YIZE official website (http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_28_389.html,reproduced please specify.