The safety operation rules of Yize mould milling machine workshop

Today, Yize mould will share with you our safety operation procedures for milling machine workshop.

1. Before starting to operate the milling machine, carefully read the manual, clear the function and use method of each handle and button, and strictly prevent misoperation.

2. Do not wear gloves when operating milling machine. For your safety, please wear protective glasses.

3. Before operation, lubricating oil must be added to the specified oil filling points. It is not allowed to work without lubricating oil, so as to avoid the wear of guide rail surface and lead screw, and reduce the service life of milling machine.
4. Check the connection screw of the bed frequently for looseness, and eliminate the abnormality in time.
5. It is strictly forbidden to pull the iron filings directly with bare hands. Iron hooks or brush should be used to remove the iron chips.
6. Clean the machine tool and add lubricating oil before work every day, and turn off the power supply of the machine tool.

It is the most important to ensure your own safety when working outside. Only when you pay attention to the work safety and the use of production equipment in the processing, can we solve the problems in time and prevent the occurrence of accidents.

The above is Yize mould milling machine workshop safety operation procedures.Precision mold parts welcome to map customization.

yizali2LL

The above article from YIZE official website (http://www.yizemould.com/)

The original address:(http://www.yizemould.com/newsshow-48-167-1.html), reproduced please specify.