The work environment of mold parts polishing

What kind of work environment that mold parts polishing need to work in?

Today I will analyze its work environment for you. When polishing the mold

parts, everyone need to prepare work plan and good preparation in advance.

That can better to polish mold parts.
Polishing process of mold parts should be separated in two workplace to

complete, that is, coarse grinding processing site and fine polishing

processing site. And you should pay attention to cleaning the sand on the

surface of workpiece. Generally from using oil stone to 1200 # sandpaper

after the completion of the coarse polishing, polishing workpiece need to

transfer to the clean room to polish, in order to make sure that no dust

particles in the air sticking in the mold surface. Accuracy requirement

above 1 microns (including 1 microns) can be polished in the clean polishing

room. But a more precise polishing require in an absolute clean space,

because dust, Smog, dandruff and saliva foam are likrly to scrap the high

precision polishing surface.
After completing mold parts polishing, the workpiece surface should do

dustproof protection measure. When the polishing process stops, all

abrasives and lubricant should be carefully removed to ensure the workpiece

surface clean. Then the workpiece surface should be sprayed a layer of mold

antirust coating. Yize Mould is a professional mold components machining 

factory. The work environment of mold parts polishing is very good in our

factory. And our polishing methods are various. So you may rest assured to

purchase our mold parts.

sdyizebg06

The above article from YIZE official website(http://www.yizemoulds.com/)
The original address:http://www.yizemoulds.com/news_show_6_29_313.html,reproduced please specify.