Stamping mold components processing method

 In the stamping mold components processing method and process, the selection of mould materials, not only related to the service life of the mold, but also directly affect the manufacturing cost of the mold, so it is an important work in the design of the die. In the stamping process, the mold is subjected to shock load and continuous operation, the convex and concave die is subjected to strong pressure and intense friction, working conditions are extremely harsh. Therefore, the selection of stamping mold components processing materials should follow the following principles:
  1.according to the stamping materials and stamping parts production batch selection of materials;
  2.to meet the processing requirements, should have a good processing performance, ease of cutting, hardening, heat treatment of small deformation;
  3. to meet the economic requirements;
  4. according to the type and working conditions of the mold, the material should be used to meet the requirements, such as high strength, hardness, wear resistance, impact resistance, fatigue resistance and so on.
  In mold components manufacturing, usually in accordance with the similarity of mold tructure and stamping mold d components processing process, all kinds of mold parts can be roughly divided into working surface parts, plate parts, shaft and sleeve parts etc.. The processing method mainly includes mechanical processing, special processing two kinds of machining methods mainly include cutting all kinds of metal cutting machine, CNC cutting machines and the ordinary car, milling, planing, drilling, boring, grinding can be completed most of mold parts processing, coupled with the fitter operation, can realize the whole mold manufacturing the. Machining method is the main method of stamping die parts, even the working parts of the mold using special processing methods, but also need to use mechanical processing method for pre processing.

Above article from KENOS official website (http://www.edm-accessories.com/)
The original address:http://www.edm-accessories.com//Mitsubishi_wire_filter.html, reproduced please specify.yizebg701